Dry Ice is used in various industries for different purposes. However, dry ice blasting is the most common use of Dry Ice. It is an efficient process for cleaning machinery and equipment across various industries. It is a non-abrasive and simple process which does not leave any residue behind. Find below more about the process below.
Dry Ice is the solid form of carbon dioxide available in pellets or blocks. The dry ice sublimates from solid form to the gas state at normal atmospheric levels without converting into liquid. It is commonly used for temporary refrigeration and cleaning process. It is a colourless, odourless, and non-flammable substance. pulvinar dapibus leo.
Dry Ice Manufacturing Process
The common method of producing dry ice starts with producing high concentration Carbon Dioxide gas. This gas can be produced or can be a byproduct of another process. The gas is then pressurized and refrigerated for liquefaction. Later, the pressure is reduced and hence, some liquid carbon dioxide vaporizes. This reduces the temperature of the remaining liquid CO2 causing it to solidify. The solidified carbon dioxide has a snow-like consistency. It is then compressed into pellets or blocks.
What is Dry Ice Blasting?
Dry ice is used for cleaning machinery and equipment in different industries. Similar to several media blasting processes, dry ice blasting is a technique of pressurizing dry ice pellets in an air stream and blasting it to a surface. When the dry ice is blasted, the surface is cleaned without leaving any residue behind.
The dry ice is blasted from blasting equipment and upon touching the surface, it sublimates into a gas state. Hence, there is no residue left behind. The kinetic energy in the dry ice is absorbed by the surface on impact. While the dry ice absorbs heat from the surface and sublimates. The energy and thermal heat help in cleaning the top layer of dirt on the surface.
Dry Ice Blasting Machine
There are 2 types of dry ice blasting machines: single-hose and two-hose machines. The two-hose machine is an older version in which 2 hoses were used for the process. One hose propelled the air stream while the other propelled dry ice. It was less efficient since the pressure of the dry ice was less. Later, the single-hose system was developed in which the dry ice is propelled along with the air stream. Hence, a single-hose system is widely used by industries for cleaning.
Advantages of dry Ice Blasting
There are several advantages of this dry ice service including the following:
Efficient and Effective Cleaning
Dry ice blasting is an effective cleaning process as it can remove old built-up contaminants from the surfaces. Also, it is a faster, non-abrasive, and simple process. It does not require the disassembly of machinery and can also help in spot cleaning.
No Residual Product
Since the dry ice sublimates into the gas state, there is no residue left behind. Hence, the technician does not need to wash away or sweep any residual from the surface. It is an environmentally friendly process that does not require the use of any chemicals.
Environmentally Responsible
Dry ice is made from reclaimed carbon dioxide which is released as a byproduct of other processes. Hence, dry ice blasting does not contribute to the release of additional CO2 in the environment. It is a non-toxic process and does not cause any environmental harm.
Operator Friendly
It is an operator-friendly process as it does not require the person to clean or wipe anything. Also, the operator is not exposed to any chemical cleaning agents. The process is simple and fast which saves the time of the operator.
Wide Application
The process is used in several industries for cleaning machinery and equipment. It can easily be used in metal, food, oil, automobile, aviation, printing, etc., industries.
![AMS Dry Ice Blasting Supplier](https://amsdryice.com/blog/wp-content/uploads/2022/05/cropped-dryicelogo.png)
AMS Dry Ice supplier in Delhi
AMS Dry Ice Supplier in Delhi is a specialized supplier and service provider. They offer high-quality contract cleaning services for several industries. They also provide products used in dry ice cleaning. Find below more about their services and products.
AMS Dry Ice Contract Cleaning services for the following industries:
Machinery Industry
Printing and Paper
Wood Industry
Automotive Industry
Visit or contact the AMS Dry Ice Supplier near me to know more about dry ice blasting products and services.
Address:- 69, Block C, Najafgarh Road Industrial Area, New Delhi, Delhi 110015
Phone Number:- 083770 06793
Chat with us on WhatsApp:- 083770 06793